Storage of the LPG cylinder in a Purivox device

Liquified petroleum gas (LPG), this is the type of gas that the Purivox airport bird control gas cannons are using to generat the loud bang. Purivox is using LPG due the fact that LPG is a very safe gas. In each Purivox airport bird control device is a LPG gas cylinder installed. The standard size is therfore a 11kg LPG gas cylinder which can generate approximatly 20.000 shots/bangs from one 11kg LPG gas cylinder.

 


Purivox CA-RC System gas cylinder  

Purivox CA-RC System

LPG gas cylinder stored in a standing position in the case. 
Secured with two secure straps.


Purivox DA-RC System gas cylinder   Purivox DA-RC System

LPG gas cylinder stored in a lying position in the case.
Secured with two secure straps.

  Purivox TA-RC System

LPG gas cylinder stored in a lying position in the case.
Secured with two secure straps.

Purivox VA-RV System gas cylinder   Purivox VA-RC System

LPG gas cylinder stored in a lying position in the case.
Secured with two secure straps.

Due the fact that a 11kg LPG gas cylinder can be used for up to 20.000 shots, the LPG gas cylinder has to be replaced/refilled once in a year.
The devices Purivox DA-RC System and Purivox TA-RC System requires a LPG gas cylinder which can be used in a lying position. Alternativly a standard gas cylinder can be used which volume is reduced to at least 75%. 

For more information about the lying LPG gas cylinder, please have a look at this information here.


 

The especially only made for the Purivox bird scarers gas regulator is delivered with one of the three following connector types.

The picture to the left shows the gas regulator with the KLF-Connector.


Purivox Gasdruckregler KLFPurivox Gasdruckregler KLF Zeichnung
KLF-Connector

A: W 21.8 x 1/14 LH
B: Wing nut
C: 18,0 mm
D: 7,0 mm


Purivox Gasdruckregler POLPurivox Gasdruckregler POL Zeichnung

POL-Connector
A: 0.880-14 NGO LH
B: 24,0 mm
C: 28,0 mm
D: 18,9 mm


Purivox Gasdruckregler SHELLPurivox Gasdruckregler SHELL Zeichnung
SHELL-Connector
A: W 21.8 x 1/14 LH

B: 30,0 mm
C: 18,0 mm
D: 12,2 mm


A: description thread
B: width across flats nexagon
C: length couling nut
D: diameter inner pin

Didn't found a gas regulator that fit to your gas cylinder? It is also possible to order special made gas regulators with other threads and connectors. Feel free to contact us if needed.

Illustration credits: GOK Regler- und Armaturen-Gesellschaft mbH & Co. KG